PAR 4C

	TYPICAL APPLICATIONS
	Encapsulation & Potting of Electronics
	Model Making & Masting
	Component Bonding
	Sealing & Gasket Forming
	Brush Setting
	Packaging
	Filter end-cap fixing
	PROCESSING TWO-PART
	· Polyurethane
	· Epoxy
	· Silicone
	· Methacrylate
	· Paint

THE PAR4C METERING MIXING & DISPENSING MACHINE

An addition to the new technically advanced ‘C’ range, the PAR4C incorporates the latest Meter Mix® Systems in-line drive mechanism (ILD) to provide controlled flow characteristics during dispense not normally associated with pneumatic machines.

ILD also assists the accurate and consistent processing of materials with high mix ratios or vastly differing viscosities.

Incorporating the same proven metering and mixing principles as it’s predecessor, the PAR4C provides the perfect solution to many applications.

In addition, the PAR4C can also be automation interfaced for fully or semi-automatic applications.

Metering Pumps: Single acting positive displacement.

Ratio Range: 1:1 to 20:1

Viscosity acceptance: Up to 500,000 cps

Shot size: From 20ml to 188ml at a ratio of 1:1

Cycle rate: Up to 20 shots per minute

Mixing: Disposable Static

Reservoir Capacity: 14 litre

Controls: Air supply filter regulator and gauge, machine on/off, dispense pressure regulator and gauge, foot valve start and emergency stop, integrated PLC

Services: 1 phase 240v electrics + compressed air

STANDARD AVAILABLE OPTIONS

1. 7 or 20 litre reservoir sizes

2. Bulk feed arrangement

3. Hand held Mixer Valve

4. Thermostatically controlled heating to reservoirs, pumps and hoses

5. Level sensing system with audible or visual alarm

6. Anti-gel purge timer

7. Agitation to material reservoirs

8. Vacuum degassing to material reservoirs

9. Shot counter/repeater

10. Mobile trolley unit

Meter Mix® Systems Ltd
Brindley Close
Rushden Business Park
Rushden
Northants
NN10 6EN

Tel: +44(0) 1933 354500
Fax: +44(0) 1933 354506
E-mail: sales@metermix.co.uk