Potting Epoxy with METER MIX® Dispensing Machines
PAR 3B

The Meter Mix® PAR 3B is the leading entry level model for dispensing accurate doses of two-component material in small and medium production volumes. The machine combines robust, industry proven operation over many years of service and is the machine of choice for many start-up companies. Specifically developed under economical aspects, the metering system is suitable for a wide range of applications and various materials such as resins and adhesives.
The PAR 3B is a proven and compact solution for potting epoxy resins and provides a clean, cost efficient alternative to hand mixing. The metering system enables the correct processing of low to medium ratio two-component, low to medium viscosity materials. The latest in disposable static mixing technology also eliminates the requirement for solvent cleaning.
Typical Applications
- Electronic Potting
- Casting
- Moulding
- Component Bonding
- Brush Setting
Typical Materials
- Polyurethane
- Epoxy
- Silicone
- Methacrylate
Technical Data
PAR 3B | |
---|---|
Ratio Range Capability | 1:1 to 5:1 (depending upon pumps selected) |
Viscosity acceptance | Up to 500,000 mPa.s (depending upon material thixotropy) |
Shot size | Available from approx. 0.5ml up to 63ml at a ratio of 1:1 by volume |
Cycle Rate | Up to 30 shots per minute (depending upon viscosity) |
Mixing | Disposable Static |
Reservoir Capacity | 2.5lt (0,66 gal) epoxy coated mild steel with silica gel moisture protection |
Standard Features
- Bench top machine
- Metering Pumps: Single acting positive displacement, side-by-side metering
- Mixer Valve: Pneumatically operated TSV601 Mixer Valve
- Either “Stalled Shot” or “Operator Controlled” shot size selection
- Controls:
- Air supply filter/regulator and gauge with connection check unit
- Main Off/On switch
- Emergency Stop Button
- Either foot pedal or hand held trigger start options available
- Compressed air operation only @ 80 p.s.i.
Available Options
- 5lt (1,32 gal) capacity reservoir sizes
- Stainless steel wetted parts to protect against corrosion
- Hardened parts to protect against abrasion
- “Metered Shot” function